地铁隧道二次衬砌钢筋网防裂性能研究

为了定量分析防裂钢筋网提高隧道衬砌结构抗裂性能的机理和幅度,以地铁双线隧道二次衬砌结构为研究对象,采用荷载结构法和杆系有限元数值模拟方案,定量分析二次衬砌结构不设置与设置钢筋网这2种情况下的开裂临界荷载。其中素混凝土结构以达到极限拉应变为临界状态,衬砌结构增设钢筋网后以达到GB 50157-2013《地铁设计规范》允许的最大裂缝宽度0.2mm为临界状态。分析结果表明,配置防裂钢筋网后,Ⅲ级和Ⅳ级围岩衬砌结构抗裂性能可分别提高22.4%和19.3%,Ⅴ级围岩衬砌结构抗裂性能提高15.2%;Ⅲ级和Ⅳ级围岩二次衬砌结构的破坏形式由脆性破坏变为延性破坏,从而提高了其安全性能。     

Traffic impact analysis of inspection area site selection at a foreign trade container terminal

ABSTRACT

To improve the security and efficiency of terminal operations, a key issue for land area layout at a foreign trade container terminal is to plan and design an inspection area. Since it directly affects terminal traffic, while determining inspection area site selection, we should pay a great attention to operations and management of terminal traffic as well as container inspection. This paper employs a system decomposition technique to develop an integrated simulation framework, which enables us to flexibly obtain the whole picture of terminal traffic conditions and evaluate traffic impacts of inspection area site selection. A real-world terminal with typical patterns of land area layout is chosen to carry out a case study, which shows that traffic flow is unevenly distributed on the terminal road network and that the distribution is influenced by truck streams at the terminal. New findings also include: (1) traffic volume at the terminal apron is rather unbalanced in association with the non-continuous utilization of berths; (2) a proper inspection area should be located near the gate if the terminal conditions permit from the perspective of terminal traffic. This work may provide a decision-making reference for the planning and construction of foreign trade container terminals.     

新型深水块石抛填和夯平一体化施工船研发应用

本文依托长江南槽一期深水航道整治工程,在深入研究现有块石水下抛填方法的基础上,研发了新型的开敞式深水快速高精度抛填和整平一体化新设备,对其可行性进行了多次测试试验,确定了装备的选型。并采用数值模拟、物模试验等结合的方法进行了结构的验算,确保设备的使用可靠性。该设备可以适应35m水深、2m/s流速,配有实时定位系统,可以实时采集抛填区域的施工效果,实现了抛填和夯平施工和质量检测一体化,通过施工数据分析,该设备达到了93%的抛填合格率,在精度提高至±20cm时合格率可达85%,整平精度可以达到5cm,创新了抛填施工的新装备,经鉴定,该装备达到了国际先进水平,可为类似设备建造选型提供借鉴。     

大型铁路客运枢纽换乘服务研究

站在运输服务设计的角度,以增强旅客换乘出行体验为目的,提出“人、行李分离”的换乘服务理念,并基于该服务理念设计铁路客运枢纽内同站和异站换乘的方案。异站换乘方案设计时,提出铁路专用车的概念,打造一种全新的换乘模式,满足旅客换乘出行的多元化需求,吸引旅客主动换乘。最后,从心理和生理舒适性两个角度对换乘服务理念进行评价,结果表明“人、行李分离”服务创造了旅客换乘出行附加价值,提高了旅客的换乘出行体验感。     

新机场管廊基坑邻近高速桥梁基础施工技术研究

新机场高速公路地下综合管廊大部分结构距在建新机场高速公路桥梁较近,基坑开挖过程易导致高速公路桥梁承台及桩侧土体外露,进而导致桥梁基础产生水平变位、不均匀沉降等现象,对高速公路后期运营产生极大的安全隐患。通过3组试验确定最优注浆参数,在管廊基坑开挖过程中对既有高速桥梁基础附近土体进行注浆加固,效果良好;通过对开挖过程中基坑、桥梁基础变形监测数据进行对比分析,对管廊基坑邻近桥梁基础开挖防护施工技术进行总结,为以后同类工程提供借鉴。     

石太铁路山区段涵洞水害成因分析及防治

山区铁路涵洞每年雨季易发生水害,影响铁路正常运营。为了查明山区铁路涵洞发生水害的原因,提高山区铁路抵御水害的能力,依托石家庄至太原铁路某涵洞水害实际治理工程,对特大洪水造成涵洞闷孔水害的成因进行分析,在调查该地区气象、水文、地质资料的基础上,按照“原状复旧、适当提升、完善排水系统、提升抗洪能力”的原则,经过桥涵水文检算,最终提出框架桥扩孔改造的复旧方案。研究表明:(1)涵洞水害主要表现为杂物拱涵堵塞淤积,道床冲空造成的线路沉降与横移,以及杂物掩埋线路;(2)水害成因可归纳为暴雨历时长、雨强大,涵洞上游自然生态发生变化,涵洞高程低,涵洞前水流转向角度大,以及其他水源汇入等5个方面;(3)建议采用扩孔顶进框架桥复旧方案,可在保证线路安全运营的前提下有效降低水害发生风险。     

便携式手动钢轨钻孔装置的研制与应用

传统钢轨钻孔作业机具尺寸大,占用劳力多,费时费力.通过分析钢轨打孔工作原理,研制了便携式手动钢轨钻孔装置,具有结构简单,体积小巧,便于携带的特点.介绍了该装置的结构、工作原理、创新特点和相关参数等.     

《电加热道岔融雪系统设备》TB/T3539-2018解读

解读《电加热道岔融雪系统设备》与《客运专线铁路信号产品暂行技术条件汇编——电加热道岔融雪系统设备》标准的共性部分,并从编制背景、标准定位、技术要求、试验方法和检验规则等方面,分析两者之间的差异性.     

山钢莱芜分公司专用铁路编组站改造方案研究

专用铁路编组站改造是山东钢铁股份有限公司莱芜分公司新旧动能转换项目的控制工程之一,对于铁路运输组织、站场设施管理工作的提升具有重要意义。在阐述既有莱钢编组站站场设施和运输组织现状的基础上,结合钢铁新旧动能转换工程规划,分析莱钢编组站目前存在的无贯通正线、到发线有效长不足、卸车线有效长不足、站坪坡度超限等问题,提出莱钢编组站改造应达到的目标。在调查、分析各项控制改造方案因素的基础上,进一步研究编组站正线平面、站场平面、纵断面改造方案。通过优化正线布置、到发线功能分组、充分设置咽喉区平行进路、采用组合道岔、增大咽喉区坡度等设计方法,达到了设定的改造目标,为同类专用铁路编组站改造提供参考。     

Integrated planning of static and dynamic charging infrastructure for electric vehicles

This paper investigates the optimal deployment of static and dynamic charging infrastructure considering the interdependency between transportation and power networks. Static infrastructure means plug-in charging stations, while the dynamic counterpart refers to electrified roads or charging lanes enabled by charging-while-driving technology. A network equilibrium model is first developed to capture the interactions among battery electric vehicles’ (BEVs) route choices, charging plans, and the prices of electricity. A mixed-integer bi-level program is then formulated to determine the deployment plan of charging infrastructure to minimize the total social cost of the coupled networks. Numerical examples are provided to demonstrate travel and charging plans of BEV drivers and the competitiveness of static and dynamic charging infrastructure. The numerical results on three networks suggest that (1) for individual BEV drivers, the choice between using charging lanes and charging stations is more sensitive to parameters including value of travel time, service fee markup, and battery size, but less sensitive to the charging rates and travel demand; (2) deploying more charging lanes is favorable for transportation networks with sparser topology while more charging stations can be more preferable for those denser networks.